Home Essential｜Dynamic LED Sequential Mirror Turn Signals for Audi Models｜ Other Products

In Stock — Ships Today from U.S. Warehouse
All variants ship same-day from Enthusiast Brands' Colorado warehouse on orders placed before 12pm MT. USPS Priority delivery in 2-4 business days across the U.S.

Dynamic LED Sequential Mirror Turn Signals for Audi Models
Upgrade your side-mirror indicators with a smooth, sequential sweep — the same premium light behavior found on new RS-line factory cars. Smoked lens gives a clean OEM+ finish when the signals aren't active, and the plug-and-play harness swaps in without cutting wires or modifying trim.

Bundling with Gloss Carbon Fiber Mirror Caps? Your turn signals ship immediately; the mirror caps are made-to-order and follow 1-2 weeks later. The 10% bundle discount applies to whichever item costs less.

Key Features

Dynamic sequential sweep — light flows across the mirror instead of a static blink

Smoked lens — reads as an OEM styling piece even when off

Plug-and-play install — swaps into the factory harness in ~10 minutes per side, no cutting

Yellow / Blue color options (B8 and B8.5 A4 platform only) — see color-mode note below

Sold as a matched pair (left + right)

OEM+ construction — sealed housing, weather-resistant, safe through car washes

Fitment — 8 platform-specific variants
Pick the variant that matches your chassis generation. The mirror shell / plug varies by chassis, so make sure the years match.
Audi 8V A3/S3/RS3 (2013–2020)
Fits pre-facelift and facelift 8V generation A3, S3, and RS3. Note: 8Y (2021+) A3 uses a different mirror housing and is not covered by this listing yet.
Audi B8 A4/S4/A5/S5/RS5 (2008–2011)
Original B8 chassis. Includes the yellow + blue color-swap wire (see color-mode note below).
Audi B8.5 A4/S4/A5/S5/RS5 (2012–2016)
B8.5 facelift. Also includes yellow + blue color option.
Audi B9 A4/S4/A5/S5/RS5 (2017–2024)
Full B9 and B9.5 generation, both pre- and post-facelift.
Audi B8/B8.5 Q5/SQ5 (2009–2017)
All B8 and B8.5 Q5 / SQ5 model years. Q5 mirror housing differs from the A4 sedan version — order this variant even if you have B8/B8.5 A4 markings.
Audi B9 Q5/SQ5 (2018–2024)
Second-generation Q5 platform.
Audi C7 A6/S6/RS6/A7/S7/RS7 (2012–2018)
Full C7 / C7.5 generation. Same mirror shell across A6, A7 and their S/RS variants.
Audi C8 A6/S6/RS6/A7/S7/RS7 (2019–2024)
Current-generation C8 A6 / A7 platform.
Yellow / Blue Color Mode (B8 and B8.5 A4 only)
The B8 and B8.5 A4 variants ship with a chipset that can drive the LEDs in yellow (factory-look) or blue (customized look for blacked-out builds):

Yellow (default): Plug into the factory harness — no extra steps.

Blue: Connect the included extra wire to your power-folding-mirror positive feed. The onboard chipset detects the signal and switches the color.

All other variants (B9, Q5s, 8V A3, C7/C8 A6) are yellow-only — no blue mode available on those platforms.
Installation

Fold the mirror out and locate the plastic release tab on the lens surround.
Gently pry the mirror glass forward using a plastic trim tool. The glass releases from its ball mount.
Disconnect the mirror heater plug and lift the glass away.
Remove the two clips holding the OEM signal lens; disconnect the plug and lift the OEM signal out.
Connect the new sequential signal to the factory harness — the plug is direct-fit.
For blue mode (B8/B8.5 A4 only): route the extra wire to your power-folding-mirror positive; splice with a butt connector.
Snap the new lens into the mirror pod; reattach the mirror glass by pressing evenly on all four sides until you feel it seat.
Repeat on the other side. Test both signals before closing the door.

Package Contents

1 × Left-side sequential signal lens (dedicated to your selected chassis)
1 × Right-side sequential signal lens
Included: plug-and-play harness ends matched to your OEM connector
B8 / B8.5 A4 variants only: extra blue-mode wire

Why Enthusiast Brands

No modifications required — precision-molded to fit the factory mirror pod cutout

OEM+ quality — sealed housing rated for daily driving and car washes

30-day money-back guarantee — swap for the right chassis version or return for a refund
Brand:Enthusiast BrandsCategory:AccessoriesSKU:EB-DYN-MIR-D0272-B8-A4Tags:Accessories, audi-a3, audi-a4, audi-a5, audi-a6, audi-a7, audi-q5, audi-rs3, audi-rs5, audi-rs6, audi-rs7, audi-s3, audi-s4, audi-s5, audi-s6, audi-s7, audi-sq5, dynamic-led, gen-8v, gen-b8, gen-b8.5, gen-b9, gen-c7, gen-c7.5, gen-c8, Local, premiumModel:Audi B8 A4/S4/A5/S5/RS5 (2008-2011), Audi B8.5 A4/S4/A5/S5/RS5 (2012-2016), Audi B9 A4/S4/A5/S5/RS5 (2017-2024), Audi B8/B8.5 Q5/SQ5 (2009-2017), Audi B9 Q5/SQ5 (2018-2024), Audi 8V A3/S3/RS3 (2013-2020), Audi C7 A6/S6/RS6/A7/S7/RS7 (2012-2018), Audi C8 A6/S6/RS6/A7/S7/RS7 (2019-2024)