2 Pin Male Screw Terminal Block - 5.08mm Pitch Pluggable - Phoenix Euroblock Style｜ Other Products

2 Pin Male Screw Terminal Block - 5.08mm Pitch Pluggable Phoenix Euroblock Style
2 Pin Pluggable Screw Terminal Block for Easy Wire Connections
This 2 pin male screw terminal block is a simple and reliable way to connect wires to a circuit board, control panel, enclosure, or custom electronics project. The pluggable Phoenix Euroblock style design makes it easy to disconnect and reconnect wiring without removing each wire from the screw terminals.
It is a great choice for prototyping, DIY electronics, small control projects, bench power supplies, panel wiring, and equipment that may need service or testing later. Instead of permanently soldering wires in place, this connector gives you a clean removable connection point.
5.08mm Pitch Phoenix Style Terminal Block Connector
This connector uses a 5.08mm pitch, also commonly listed as 0.2 inch spacing. The green Phoenix style Euroblock format is widely used in electronics, power input connections, control wiring, audio equipment, industrial panels, and custom-built test gear.
The male 2 position terminal block is designed to be used with the matching female plug connector, allowing wires to be unplugged from the board or panel when needed. This is especially useful when building a project inside an enclosure where you may need to remove a panel, service a board, or change wiring later.
Great for Prototyping, Panels, and Custom Bench Power Supplies
These 2 pin screw terminal block connectors are useful for projects where you want a strong but removable wire connection. They work well for DC power input, low-voltage wiring, sensor wiring, control connections, and rear panel input connectors on custom bench power supplies.
For example, this style of connector is helpful when wiring components from a front or rear panel to an internal PCB. You can disconnect the plug when opening the enclosure instead of cutting, unsoldering, or fighting with fixed wiring.
Wire Size, Rating, and Temperature Specifications

Product Type
2 Position Male Screw Terminal Block Connector

Connector Style
Phoenix Euroblock Style Pluggable Terminal Block

Positions / Pins
2 Pin

Pitch
5.08mm / 0.2 inch

Rated Value
AC 300V, 15A

Wire Size Range
12-28 AWG

Recommended Strip Length
7-8mm

Material
PA66 Plastic

Color
Green

Temperature Range
-40°C to +105°C

Package Includes
1 x 2 Pin Male Screw Terminal Block Connector

Why Use a Pluggable Screw Terminal Block?
A pluggable screw terminal block gives you the convenience of a removable connector with the secure hold of a screw clamp connection. This makes it easier to build, test, troubleshoot, and repair electronics projects.
For everyday electronics builders, this means less hassle when wiring power leads, panel-mounted parts, or removable modules. If your project may need to be opened later, a detachable terminal block can save time and make the finished build cleaner.
Need the Mating Connector?
This male screw terminal block is designed to be used with a compatible 2 position Phoenix style plug. If you need the mating connector, use Vetco part VUPN7816 2 Position Phoenix Connector Plug - 12-22AWG Wire - 15A.
Why Vetco Carries This Connector
Vetco carries this 2 pin male screw terminal block because it is one of those small parts that makes a big difference in a finished electronics project. It is easy to use, practical, and helpful for anyone building panels, power supplies, control boxes, test fixtures, or prototypes.
Before buying, double check your connector spacing, voltage and current needs, and wire gauge. While the listed wire range is 12-28 AWG, 12 AWG is at the upper end of what this style of connector is intended to accept, so confirm fitment for your specific wire before installation.
Brand:Vetco ElectronicsSKU:VUPN2958